CTRTA ENVIRONMENTAL DECLARATION

CTHx CTRx ED2.docx
Page 3 of 3
Created: 2018-12-14 Revised: 2018-12-14
AB Regin
Box 116, SE-428 22 Kållered
Visiting address: Bangårdsvägen 35
Tel: +46 (0)31 - 720 02 00
E-mail: [e-mail]
www.regincontrols.com
Emergency
In case of fire the plastic may emit gases harmful to human health. The amounts of these substances
are small compared with the size of the product.
Circuit boards may emit toxic flue gases.
DEMOLITION
The product is prepared for environmental-friendly dismantling.
Dismantling of the product:
1. Open the product cover according to the supplied instructions.
2. Use a screwdriver to separate the plastic and electronic parts and recycle at appropriate
facility.
WASTE MANAGEMENT
The long life span of the product means that the recycling situation may differ from today when the
product is recycled.
The product is required, by law, to be handled according to standard waste management procedures.
The materials can easily be separated to a high separation degree.
Plastic parts can, theoretically, be recycled. Recovering of energy through combustion is considered
the best option in the present situation, since the plastic does not contain any substances dangerous to
the environment.
Circuit boards with components are required by law to be dismantled and constituent components to
be identified. Swedish companies in electronic recycling separate in three main fractions. Recycling of
materials, recovering of energy and dangerous waste.
Identified metallic constituents are returned to metal recycling.
Combustible materials are returned for safe disposal in a licenced incinerator.
Dangerous waste is returned for destruction to a licenced entrepreneur.