CTRTA ENVIRONMENTAL DECLARATION

CTHx CTRx ED2.docx
Page 2 of 3
Created: 2018-12-14 Revised: 2018-12-14
AB Regin
Box 116, SE-428 22 Kållered
Visiting address: Bangårdsvägen 35
Tel: +46 (0)31 - 720 02 00
E-mail: [e-mail]
www.regincontrols.com
PRODUCTION
The components are mounted manually and automatically and are thereafter soldered together with
classified soldering. The environmental consequences are negligible and consist solely of air outlet
from soldering.
The operation does not require licencing.
DISTRIBUTION
Production origin
Bressanone, Italy
Mode of transportation
Lorry, train
Mode of distribution
The product is normally distributed via a warehouse/wholesaler
Wrapping Material
Wood, paper, plastic
Packaging material can not be returned.
AB Regin is connected to FTI.
BUILDING PHASE
Documented instructions for mounting and commissioning are included with the product.
The instructions contain recommendations concerning
• Safeguard measurement for handling procedures and mounting.
• Handling of the product at the workplace and during mounting.
USAGE PHASE
Normal operation
The product requires energy (electricity) during normal operation. Power consumption is <2.5W and
depending on model.
The product does not have any environmental impact on the surrounding environment during normal
operation.
Normally, the product does not require any maintenance.
It is possible to estimate the product’s life span in advance.
There is no documentation concerning the expected life span when the product is under different
conditions.
Documented instructions for appropriate operation and maintenance are supplied with the product.
PRODUCT INFORMATION, RESOURCES AND HAZARDOUS SUBSTANCES
Component modules
Resources
(metals, organic, non-organic
substances)
Hazardous
substances
(Kd, Hg, Pb, PCB, PVC,
PBB, PBBE etc)
PCB assembly
Epoxy, Cu, Fe, Ag, Sn
TBBPA
Casing
PC
Screw terminals
PA, Fe, Zn
Notes, the product’s content
---