CTRTA ENVIRONMENTAL DECLARATION

CTHx CTRx ED2.docx
Page 1 of 3
Created: 2018-12-14 Revised: 2018-12-14
AB Regin
Box 116, SE-428 22 Kållered
Visiting address: Bangårdsvägen 35
Tel: +46 (0)31 - 720 02 00
E-mail: [e-mail]
www.regincontrols.com
Environmental Declaration Type II
GENERAL PRODUCT INFORMATION
Name of product(s)
Packaging
CTHR, CTHR-D, CTHRA, CTHRA-D,
CTHRC, CTHRC-D, CTRC, CTRC-D,
CTRTA, CTRTA-D
Cardboard
COMPANY INFORMATION
Company, address and telephone
AB REGIN
Box 116
SE-428 22 Kållered
Sweden
Tel: +46 - (0)31 - 720 02 00
E-mail: [e-mail]
Company description
Regin is the collected trademark for products and systems in building automation. The company’s
knowledge is based on many years of wide experience in control, automation and flow control.
AB Regin has a certified quality assurance system according to ISO 9001.
Ongoing environmental work
Regin designs products on commission from clients as well as for resale. Regin can control
environmental aspects related to product development and when choosing suppliers and components.
AB Regin intend to begin working with environmental certification according to ISO 14 001.
AB Regin intend to gradually start developing Environmental Declaration Type II for our products.
PRODUCT INFORMATION
General
The recommended field of application is stated in the technical documentation.
There is an unambiguous and lasting label (manufacturer, product name, serial number etc) on the
product.
The labelling is linked to the technical documentation which makes the product clearly identifiable.
Product design
The product consists of an assembled circuit board mounted in a plastic casing intended for wall
mounting. The enclosure has two parts and is assembled without screws.
Component modules
Weight
grams
Weight
%
Enclosure
60
52-63
Electronics assembly
31-47
33-41
Screw terminals
4-8
4-7