CONTROL CABINET EXTENSION KIT INSTR 247017A002

Control cabinet extension kit
3 (5)
Prepare the control cabinet for the control cabinet extension kit
Loosen the screws to open the control cabinet’s lid.
Note:
Save the screws to the lid, they will be reused.
Remove the control cabinet from the air handling unit.
• For Topvex SC/TC, SR 20–60 Unscrew the control cabinet.
• For Topvex SR 80–100, TR 20–80 the control cabinet is loosely placed on top of the
air handling unit at delivery.
Loosen the PE cable and shielded cable from the control cabinet, image shows location
(pos 1).
Note:
Shielded cable only in Topvex SR/TR
Disconnect the cabling connectors that connect the control cabinet and the air handling
unit.
1
1
Systemair Sverige AB · Industrivägen 3, SE-739 30 Skinnskatteberg, Sweden
Phone [phone] Fax [phone] 247017-en_GB- vA002