CONTROL CABINET EXTENSION KIT INSTR 247017A002

Control cabinet extension kit
2 (5)
Prepare air handling unit for installation of control cabinet extension kit
Open the doors to the air handling unit.
Remove the filters if necessary for easy access.
Disconnect the cabling connectors (1) that connect the control cabinet and the air
handling unit.
1
Location of cabling connectors differ between air handling units, see pos 1 for location.
1
1
Remove the outer cable grommet on the air handling unit’s casing. New cable grommets
are attached to the extension kit cables.
Pull out the cabling from the air handling unit.
Systemair Sverige AB · Industrivägen 3, SE-739 30 Skinnskatteberg, Sweden
Phone [phone] Fax [phone] 247017-en_GB- vA002