BVB IF Q

BVB’s guideline and information requirements for assessment of product, Version 2016-1. Updated information 2016-12-19
2
2. Declaration of contents:
Does the product or any of its subcomponents, if it is a
composite product, contain substances with particularly
hazardous properties (Substances of Very High Concern,
SVHC-substances), which are included in the Candidate List
at a concentration above 0.1 weight%?
☐ Yes ☒ No
If yes , specify which substances in Table 1.
State the date (year, month, day) for control the Candidate
List.
Date: 2021-05-03
The concentration is calculated at component level established on the principle “once a product, always a product”.
The Candidate List is available at: http://echa.europa.eu/sv/candidate-list-table.
Specify the total content of the article or the chemical product, on delivery, in Table 1, or alternatively attach other
documentation that provides the corresponding information. For instructions, please refer to the “Declaration of contents, BVB’s
declaration requirements, 2016-1”, which is found at the end of this document.
Table 1, Contents of included substances and material (declaration of content in accordance with requirements)
Included substances and material
EG No./CAS
No. (alternatively
alloy)
Weight%
(of entire
product)
When applicable,
state for which
subcomponent
Weight%
(of
substance
in
subcompo
nent)
Comments
(state
eventual
application
of non-
harmonized
classification
s)
Acrylonitrile butadiene styrene ABS
9003-56-9
29,00%
Acrylonitrile
butadiene styrene
ABS
Alloy Fe+Si
36,00%
Alloy Fe+Si
Carton
15,00%
Carton
Copper - Cu
7440-50-8
4,50%
Copper - Cu
Paper
4,3%
Paper
Alloy Fe+Zn
3,5%
Alloy Fe+Zn
PP+20%CaCO3
0,00%
PP+20%CaCO3
Poliamide 6
25038-54-4
1,50%
Poliamide 6
Iron Fe
7439-89-6
1,00%
Iron Fe
Polystyrene - PS
9003-53-6
0,00%
Polystyrene - PS
Alloy Fe+C
2,17%
Alloy Fe+C
Glass epoxy
0,00%
Glass epoxy
Bronze – Cu+Sn
158113-12-3
0,05%
Bronze – Cu+Sn
Polyethylene PE
9002-88-4
0,00%
Polyethylene PE
Polyethylene terephthalate – PET
25038-59-9
0,00%
Polyethylene
terephthalate –
PET
Pond - Sn
7440-31-5
0,40%
Pond - Sn
TPE
308079-71-2
2,50%
TPE
Ethylene vinyl acetate
24937-78-8
0,00%
Ethylene vinyl
acetate
Acetal copolymer POM
9002-81-7
0,00%
Acetal copolymer
POM
Felt
0,02%
Felt
Poliamide 6.6
32131-17-2
0,03%
Poliamide 6.6
PVC
9002-86-2
0,02%
PVC
Polyester
<0,01%
Polyester
Polypropylene - PP
9003-07-0
<0,01%
Polypropylene -
PP
Adhesive
<0,01%
Adhesive
Are all substances reported in percentages down to 0.01%
in Table 1? (enable assessment with regard to the Recommended
level)
☒ Yes ☐ No
If not , does the report fulfill the instructions for the Accepted
level, which is described in “Declaration of contents, BVB’s
☐ Yes ☐ No