OUTDOOR LOUVER GRILL 210 TA INSTRUCTION

Description
Regulating damper with opposed and aerodynamic vanes,
manufactured
in aluminium
(AOBD-102-E). The body of the damper has built-
in air tight
gaskets all around its
inner perimeter to ensure a tight seal. The
movement of
the vanes is ensured by means of gears, achieving a proper
friction, with manual or
motor-driven operation.
Vanes
are available with 75 and 100 mm vane axis
distances, to complete
the entire range of standard duct
dimensions.
Flat
parallel-vane (SOBD-105) or opposite-vane (SOBD-
106) regulating
dampers, manufactured in galvanized steel
sheet, manually operated or
rea
dy for motor-drive
operation. Actuation is carried out through nylon
bearings.
They incorporate air tight gaskets on th
e upper and lower
longitudinal sides of the vanes to ensure a tight seal.
Dampers with leak
proof gaskets incorporated on the
damper's ve
rtical profiles can be
supplied upon request.
Finishes
In natural aluminium (AOBD) or in galvanized steel
sheet
(SOBD /
SPBD).
Overall dimensions
See page 5. Rest of dimensions according to the
drawings on the
left.
Mounting
It is mounted directly on
to a duct, supported on the
damper border
flanges or framing.
All the damper's operating mechanisms are
installed within
the U
frame. This way, the air can flow freely and it
facilitates its installation
in closed ducts. The mechanisms
as well as the mount
ing hardware
used are made of
corrosion resistant materials.
Other constructions
Possibility of manufa
cturing two solidly joined dampers
at 90°, to
obtain the same degree of aperture/closing for
both dampers (models
AOBD
-102-E-ND90 or SOBD105-ND90). For
the same application,
it is also available for
parallel mounting.
Manually Operated Model AOBD-102-E
Manually Operated Model AOBD-102-E double-
length (L>1200)
100 Series Regulating Dampers
2
Series 100-200
Double Damper at 90° Model AOBD-102-E-ND90
Aluminium opposed-vane regulating damper.
Sheet metal parallel-vane regulating damper.
Sheet metal opposed-vane regulating damper.
Length x height dimensions (mm).
Ready to be motorized.
Manually operated.
Servomotor driven (indicate what type in the order).
L x H (mm)
AOBD-102-E
SPBD-105
SOBD-106
-
+MM
+MT