MANUAL INSTALLATION BF 100MX

18
INSTALLATION TYPE (I)
Setting Value Displayed
Through wall (default)
tW
Inroom-Ducted
Ir
8) RUN-ON TIMER
Theunitisequippedwitharun-ontimer,settablefrom1to25minutes.Whentheexternalswitchisturned
off, the unit continues to run at the intermediate speed for the pre-set period of time.
Whenthetimeisexpired,theunitreturnstotheminimumcontinuousspeed.
Iftheexternalswitchdoesnotstayactivefor3minutes,therun-onisnotperformed.
InAUTOmodetherun-ontimerisautomaticallyactivated,dependingonhowlongtheswitchisactive,as
follows:
-iftheexternalswitchisactiveforunder3minutes,theunitdoesnotrun-on.
-iftheexternalswitchisactiveforbetween3and10minutes,theunitrunsonfor5minutes.
-iftheexternalswitchisactiveforbetween10and20minutes,theunitrunsonfor10minutes.
-iftheexternalswitchisactiveforover20minutes,theunitrunsonfor15minutes.
Therun-ontimercanbesetinthefollowingway:
-presstheMENUbuttonuntilthe“t” (t) letterisdisplayed.
-pressthebuttons+or-toincreaseordecreasetherun-ontimebetweenthevaluesshowninthetable
below:
RUN-ON TIMER (t)
Setting (minutes) Value Displayed
AUTO(default)
AU
1
01
5
05
10
10
15
15
20
20
25
25
OFF
of
9) HUMIDISTAT
Theunitisequippedwithahumiditysensorthathasanadjustablethresholdof65-95%.Ifthehumidistatis
activated,theunitrunsattheintermediatespeedandcontinuestorunforaxedtimeof5minutesafterthe
humidityleveldropsbelowtheselectedthreshold.
InAUTOmode,thehumidistat,whichrecordsthehumiditylevels,triggersifthereisasteepvariationofthe
humidityandifhumiditylevelisover65%.
Thehumidistatcanbesetinthefollowingway:
-presstheMENUbuttonuntilthe“h” (h) letterisdisplayed.
-pressthebuttons+or-toincreaseordecreasethehumiditythresholdbetweenthevaluesshowninthe
table below:
Theinstallationtypecanbesetinthefollowingway:
-presstheMENUbuttonuntilthe“I”(I) letterisdisplayed.
-pressthebuttons+or-tochosethetypeofinstallationasfollows: