Topvex Softcooler SR Operation and Maintenance 208766A003

Cooling flow chart |
7
6.2.2.1.1User interface
• Bell symbol
Display the list of active alarms
• Prg
Enter the main menu tree
• Esc
Return to the previous screen
• Up arrow
Scroll a list upwards or increase the value
shown on the display
• Enter arrow
Enter the selected submenu or confirm the set
value
• Down arrow
Scroll a list down wards or decrease the value
shown on the display
6.2.2.1.2PGD1 Menu
From this mask you have access to the specific menu
dedicated to the Power+ inverter parameters.
Submenu masks are marked as follows:
• Configuration masks, with Pa01, Pa02, etc
• Regulation masks, with Pb01, Pb02, etc
• Custom configuration masks, with Pc01, Pc02, etc
From this mask you have access to the specific menu
dedicated to the EVD Evo Parameters.
Submenu masks are marked as follows:
• Configuration masks, with Ea01, Ea02, etc
• Regulation masks, with Eb01, Eb02, etc
• Manual cmd masks, with Ec01, Ec02, etc
From this mask you have access to the manual control of
compressor and EVD valve for servicing; masks are indexes as
Ma01 and Ma02.
From this mask you have access to the masks dedicated to the
other parameters; all these masks are marked with Ot01, Ot02,
etc.
From this mask you have access to the specific masks
dedicated to the defrost option parameters; all these masks
are marked with Df01, Df02, etc.
From this mask you have access to the specific masks
dedicated to the BLDC compressor parameters; all these masks
are marked with Co01, Co02, etc.
6.2.2.1.3Pa Menu: Power+ configuration
Reserved to Power + inverter configuration (e.g. "Compressor model"): generally there is no need to access to these
masks for the purpose of this application program as all necessary setting has already been configured at the origin.
208766 | A003