Topvex SoftCooler SR Installation instructions CE208765 A005
Table Of Contents
- 1 Declaration of Conformity
- 2 Warnings
- 3 Refrigerant Control/Reporting
- 4 Product information
- 5 Transport and storage
- 6 Installation
- 7 Function Description
- 8 Commissioning protocol
10
| Installation
6.4.1 Assembley the Topvex SoftCooler SR
Fig. 6 Left hand unit (right hand units are mirrored)
Make sure that the sealing stripes and faces in-between the units halves are undamaged. Place the SoftCooler between
the two air handling units parts and carefully push them completely together. The SoftCooler is joined to the air han-
dling parts by 4 M10 screws, one in each corner.
1. Remove the cover plate on top of Softcooler to access the inner upper mounting screw on the SoftCooler side that
faces the rotary heat exchanger.
2. Remove the exhaust air filter to access the inner upper mounting screw on the Softcooler side that faces the exhaust
air filter.
3. Remove the supply air fan to access the inner upper screw on the Softcooler side that faces the supply air fan.
4. When all 4 screws are in place remount the supply air fan, the exhaust air filter and the cover plate on top of the unit.
208765 | A005