Installation manual BF X

10
2014/35/EULowVoltageDirective(LVD)
2014/30/EUElectromagneticCompatibility(EMC),
inconformitywiththefollowingstandards:
ElectricalSafety:EN60335-1(2012)+A11+A13;EN60335-2-80(2003)+A1+A2.
ElectromagneticCompatibility:EN55014-1(2017);EN55014-2(2015);EN61000-3-
2(2014);EN61000-3-3(2013).
STANDARD CONFORMITY
thepercentageofRelativeHumidityexceedsthepre-setinterventionthreshold,the
fanstartsupautomatically.WhenthepercentageofRelativeHumiditygoesbelowthe
threshold,thefancontinuestofunctionforapre-setperiodoftime.
Operationwithswitchconnection:connectedaccordingtothediagraming.48B,
afterthelightisswitchedon,thefanactivateswithadelayofaprox.1.5seconds.After
itisswitchedoff,thefancontinuestofunctionforapre-setperiodoftime.
Attention: when the relative humidity level is higher than the pre-set threshold,
automaticoperationwithhumidistathaspriorityovermanualoperation,orratherthe
fan cannot be stopped via switch.