INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION KBT002

1.5 Name plate
1
7
8
9 11
12
2 3 4 5 6
13
10
1. Type designation: Product name, dimension and motor
type. Refer to 1.5.1 Type designation page 2.
2. Current, A
3. Input power, W
4. Frequency, Hz
5. Certifications
6. Scannable code
1
7. Voltage, V
8. IP class, enclosure class
9. Insulation class
10. Serial number: part number/production number/produc-
tion date
11. Nominal fan speed
12. Weight, kg
13. Country of production
Note:
The data on the name plate applies to “standard air” that is
specified in the standard ISO5801.
1.5.1 Type designation
Product name KBT AC KBT EC
Dimension 160 160
180 180
200 200
225 225
250 250
280
Motor type DV: 4 pole, 3–phase 400V EC: Electronically commutated, 1–
phase 230V
E4: 4 pole, 1–phase 230V
D4 IE2: 4 pole, 3–phase 400V, High
Efficiency
D4 IE3: 4 pole, 3–phase 400V, Premi-
um Efficiency
1.6 Product liability
Systemair is not liable for damages that the product causes
in these conditions:
• The product is incorrectly installed, operated or
maintained.
• The product is repaired with parts that are not original
spare parts from Systemair.
• The product is used together with accessories that are not
original accessories from Systemair.
• The product is used without motor protection.
2 Safety
2.1 Safety definitions
Warnings, cautions and notes are used to point out specially
important parts of the manual.
Warning
If you do not obey these instructions,
there is a risk of death or injury.
2
1. Use a mobile device to scan the scannable code and go to the Systemair documentation portal for more documentation and document
translations.