Manual PDK65

Main offi ce
Frico AB Tel: [phone]
Box 102
SE-433 22 Partille [e-mail]
Sweden www.frico.se
For latest updated information and information
about your local contact: www.frico.se
Technical specications for Power supply
Voltage: 230 VAC.
Frequency: 50/60 Hz.
Units power con-
sumption:
Nominal: 1 W.
Max. 5 W.
Load: 10 A at 230 VAC, cos φ = 1.
5 A at 230 VAC, cos φ = 0.5.
Error indication:
The PWR LED ashes slowly as the output type: Ext.Cont
(External contactor) is selected or the sinusoidal curve is not
detected correctly with power up or down of the relay.
Reset:
Reset to the correct power up or down or at feed reset.
Ambient
temperature:
- 25 to + 45
o
C.
Protection class: Protection class 1.
The product complies with protection class 1 as it connects to pro-
tective earth for earthing of the units it controls.
Protection class 2.
Should protective earth not be required for the connected units, the
product will then comply with protection class 2 and therefore there
will be no requirement to connect protective earth to the product.
However, protective earth may be connected even if it is not divert-
ed.
Housing: IP65.
Dimensions (W x
H x D):
88 x 88 x 39 mm.
2017-12-20, HH