EXTERNAL DISPLAY

S-208997

Cabling

S-208997 is normally delivered without a connection

cable. However, a cable can be ordered separately. The

connection cable is available in two versions, 3 m or 10 m.

If a connection cable is instead manufactured by the user,

its maximum usable length is 100 m.

Mounting

S-208997 can be mounted on a wall or a device box

(cc 60 mm). It can also be mounted on a cabinet front

using the supplied magnetic tape. The magnetic strips

are pasted onto the back of the unit. When using this

mounting, the cable should be led through the alternate

outlet at the bottom of the wiring compartment. See

Figure 1.

Figure 1. The cable is led through the outlet

It is also advisable to place a cable tie in accordance with

Figure 2 in order to prevent a cable being torn from the

display.

S-208997 can also be used as a hand-held terminal.

Figure 2. The cable should preferably be ﬁxed in place using a cable tie (1)