TRVS15 25 Johnson Controls

PB_VG3000_03 2020
9
Technical Specications VG3000
Threaded Male Connection
Models VG3210xx VG3211xx VG3310xx VG3410xx
Body Type 2-way
PDTC (NO)
2-way
PDTC (NO)
3-way
mixing/diverting
3-way mixing/
diverting with built-in
by-pass
Body Rating PN16 Nominal, maximum rated pressure
Inherent Flow Characteristic Linear
Service Water, glycol solutions (max 50%) for HVAC applications.
Fluid Group 1 according Regulation (EC) No 1272/2008
(proper water treatment is recommended, refer to VDI 2035)
Body Size DN10 - DN15 - DN20
Max Pressure drop ∆p
DN10 70 kPa 80 kPa 70 kPa 70 kPa
DN15 50 kPa 60 kPa 50 kPa 50 kPa
DN20 40 kPa 50 kPa 40 kPa 40 kPa
Kv
s
and max. close-off pressure See “Ordering Code and Dimensions” on page 2
Body Connection Gas (ISO 228/1)
Nominal Stroke 4.0 mm
Connection to Actuator M30 x 1.5
Materials
Body: EN12165 CW617 Brass CuZn40Pb2
Trim: Stem: AISI 303 stainless steel (X10CrNiS1809)
Spring: AISI 302 stainless steel (X10CrNi1809)
Plug: EPDM
Leakage Max 0,01% of K
VS
, Class IV for ANSI FCI 70-2 and EN60534-4 modif. 1
Fluid Temperature Limits 2...110 °C
Ambient Temperature Limits 2...50 °C
Max weight packaging excluded
2-way NO 2-way NO
3-way
mixing/diverting
3 way
mixing /diverting
+ built-in bypass
DN10 200 g 215 g 200 g 350 g
DN15 200 g 215 g 250 g 400 g
DN20 500 g 515 g 550 g 800 g
Compliance Johnson Controls declares that these products are in compliance with the essential
requirements and other relevant provisions of the PED (Pressure Equipment Directive)
2014/68/EU (Paragraph 4.3).
CE marking is not applicable.
ROHS (2011/65/EU) when connected with an actuator.