VTR 100B LITE User manualv01

4
| Configuration
2 Configuration
2.1 Control panel
Connect the unit electrically to the mains with the enclosed plug and check that it starts up correctly.
The control panel is used to make the necessary adjustments.
An external control panel can be connected on the top of the unit.
The illustration below shows the control panel with a short description.
1
2
3
4
Fig. 2 Control panel
Position Description
Explanation
1
Display Shows symbols, menus and settings
2
SELECTION knob Move through the menu lists or change settings and values by
turning the knob left or right
3
ENTER button ENTER menu choices or settings by pressing the button
4
RETURN button Step RETURN in the menu levels and to abort an initiated
parameter change and restore the original value by pressing the
button
212961 | 01