MA FRICO SIRE ADVANCED FUNCTIONS AC GB 160927

SIRe Advanced Air Curtains
7
Main menu
System on/off
Fan control
Installer menu
Main menu>Installer menu
Enter password
(See manual)
0 0 00
FF
FF
FF
>Installer menu
Installer status screen
Week program
Fan settings
2°C
002
Adv.
Comfort
Flexible
-
Auto
AC10
Installer status screen
Functionality mode
Eco / Comfort mode
Door mode
Current stage
Over run mode
Program
Installer status screen
Week program
Fan settings
>Installer menu
>Installer menu>Week program
Change program
New program step
Check program
Check program
Tu e Wed Thu Fri Sat SunMon
08:00
18:00
Day (1)
Night (2)
Check program
Tu e Wed Thu Fri Sat SunMon
08:00
18:00
Day (1)
Night (2)
Tu e 10:45
00:00
Tu e 10:45
>Installer menu>Week program
Check program
Week program on/off
New program step
New program step 7/16
Mode
Day
Tu e 10:45
Tu e Wed Thu Fri Sat SunMon
Tu e 10:45
Tu e Wed Thu Fri Sat SunMon
End
>Installer menu
Installer status screen
Week program
Fan settings
Heating settings
Filter guard settings
External control
General settings
Support menu
GB
Installer menu
To enter the Installer menu, code 1932 is
entered. Select the digits using the rotary dial
and confirm using the forward arrow.
Installer status screen
Check the settings. The installer status screen
consists of three pages with settings, scroll
using the rotary dial.
Week program
Make settings for week program.
A basic program is pre-entered in SIRe.
Mon-Fri Day from 08:00, Night from 18:00
Sat Day from 10:00, Night from 16:00
Sun Day from 11:00:00, Night from 14:00
To check which program is set for a particular
day, select Check program and then switch
between the days using the rotary dial.
To check which days a certain program is
active, select a week day by pressing the
forward arrow, the program is marked and
those days that the program is used will be
underlined, switch between the programs for
a particular day using the rotary wheel.
To add program step, select New program
step. Confirm your selection with the forward
arrow. Select Day, Night or Off (if the unit
should not be in operation), set the time
for switch on and then for which days the
program applies, then go to End to finish.