MA FRICO SIRE ADVANCED FUNCTIONS AC GB 160927

SIRe Advanced Air Curtains
11
>Installer menu>Heating
settings
Outdoor temp. limit
>Installer menu>Heating
settings
Outdoor temp. limit
Eco / Comfort
Open door setp. diff.
•
15°C
Filter guard settings
Fan settings
Heating settings
>Installer menu
>Installer menu>Heating
settings
Outdoor temp. limit
Eco / Comfort
>Installer menu>Heating
settings
Eco / Comfort
Comfort mode•
Open door setp. diff.
Eco mode
>Installer menu>Heating
settings
Open door setp. diff.
• 3.0 K
>Installer menu>Heating
settings
Heating step diff.
Eco / Comfort
Open door setp. diff.
>Installer menu>Heating
settings
Heating step diff.
• 1.0 K
>Installer menu>Heating
settings
Heating step limit
Open door setp. diff.
Heating step diff.
Heating step limit
• 3
Sensor calibration
Heating step diff.
Heating step limit
>Installer menu>Heating
settings
>Installer menu>Heating
settings
GB
Heating settings
Make settings for heating.
Outdoor temp. limit
Blocking heating summer time.
Factory setting
Outdoor temp. limit: 15 °C (5 – 30 °C)
Eco / Comfort
Select between Eco and Comfort mode
depending on whether energy savings or
optimal comfort is more important.
Comfort mode gives faster comfort and a
slightly higher output. Comfort mode prio-
ritszes the temperature comfort, the control
system only accepts a smaller deviation from
the set room temperature.
In ECO-mode several functions and para-
meter values are changed, as shown in the
display, which gives lower energy consump-
tion. For units with internal temperature
sensor the outlet temperature is restricted to
32°C which further reduces the energy con-
sumption.
Unit with electrical heating
Max heating step is limited.
Unit with water heating
To use the Eco functions it is necessary for
the valve actuator to be controlled by 0-10V.
Open door setp. diff.
Set by how much the set point value (Room
temp. day/night) is to increase when the door
is open.
Factory setting
Set point value difference open door: 3.0K (0K
– -10K)
Heating step diff.
Unit with electrical heating
The temperature difference between
connection of the electrical heating step.
Factory setting
Heating step diff: 1.0K (0K – 10K)
Heating step limit
Unit with electrical heating
Possibility of limiting the heating.
Factory setting
Heating step limit: 2/3 (1-2/3)