Configuration Manual

Version Document
A
001
A
ccess V4.X Configuration manual
5 (56) 2018-07-11
Introduction
This specification gives a general overview description of the software menu and
web interface.
Italic text in the left margin indicate an action, the following text describes the
breadcrumb; the navigation path:
Activate Configuration > Function Configuration > Function Activation
If you click on breadcrumb, you will going up in menu structureTerminology
Abbreviation terms for software specification.
User levels

Enduser
Whenloggedout
Read/write—Homepage
Possibleactionsinendusermodearetostoptheair
handlingunitformaintenance(e.g.filterexchange),
changethetimeforextendedrunandchangethe
temperaturesetpoint.

Operatormode—login
with1111
Loggedin
Readand
writeprivileges(exceptConfiguration).

Servicemode—login
with0612
Loggedin
Fullreadandwriteprivileges.
Explanation input step values
Rangeofinputvalue Selectablestep
0..10 Valueisselectableininteger
0,1,2,3andsoonupto10
0.0..10.0 Valueisselectableinonedecimal
0.0,0.1,0.2andsoonupto10.0
0,2,4,6,8 Valueforinputisonly0or2or4or6or8.
Noothervaluesareallowedtouse
Term Function Unit