ACCESS QUICK CONFIG GUIDE SW 4 0 1 05 157618
Table Of Contents
- 1 About this document
- 2 How to set up a function
- 3 Save commissioning settings
- 4 Quick configuration guides
- 4.1 Editable naming
- 4.2 Alarm configuration
- 4.3 Fan control type (Pressure)
- 4.4 Temperature control type (Room)
- 4.5 Extended operation
- 4.6 Fan compensation
- 4.7 CO2 control (Fan start/stop)
- 4.8 Fire/Smoke function (Fire)
- 4.9 Free cooling
- 4.10 External cooler (DX)
- 4.11 External heater (Water)
- 4.12 Change over
- 4.13 External stop
- 4.14 Support control
2
|
Save commissioning settings
3 Save commissioning settings
When the installation is complete and all functions are tested it is recommended to save a local backup of the current
configuration in the control unit.
Select Yes on Save settings local in the Configuration > System settings > Save and restore set-
tings menu.
Overview:
Configuration > System settings > Save and restore
settings
04 Apr 13:54
Save commissioning settings
Yes
Step by step:
1.
Select Configuration from the navigation icons
2. Select System settings
3. Select Save and restore settings
4. Select Yes on Save commissioning settings.
157618 | A002