Installation Instruction
Table Of Contents
- 1 Product information
- 2 Overview
- 3 Warnings
- 4 Unloading from trailer
- 5 Transport and storage
- 6 Unpacking
- 7 Duct connections
- 8 Internal components
- 9 Installation
- 10 Electrical connections
- 11 Connection of water heating coil
- 12 Access control system
- 13 Connect accessories in Control unit CU27-C
- 14 Dimensions and weight
- 15 Technical data
- 16 Additional equipment
- 17 Disposal
- 18 EU Declaration of Conformity
- 19 UK Declaration of Conformity
16
| Installation
Remove middle door beams
8. Loosen the screws on the door beams (6 screws on front and 6 screws on the back) and remove the beams.
Remove the roof
9. Remove the cabling from the roof part.
10.Loosen and remove the 8 screws for the roof's outer beams.
11.Remove the roof.
Warning
The roof part is bulky, two person is needed.
12.For weight reduction; remove the upper partition wall (remove bunch band anchors for cabling).
214958 | A007