UserManual S SA2 S SA2L202010
Table Of Contents
- Table of Contents
- Introduction
- Warnings
- Operating Conditions
- Installation
- Installation Methods
- Opening Preparation for S-SA2 Installation
- Standard Distances Between Damper Bodies
-  Installation into a Soft Crossing (up to Size 1000 × 800 mm)
- Connecting S-SA2 to “multi” Ductwork Made of Boards
- S-SA2L Installation
-  Installation on the Vertical Duct with a Ledge
-  Installation Directly on the Horizontal Duct
- Electrical Connections
- Operation Manual
- Smoke Damper Functionality Check
- Smoke Damper Inspection
- Warranty Conditions
- Operating Journal
- Warranty Service
Wet
S-SA2
12/40 | User Manual S-SA2 & S-SA2L | 201905
Fig. 4: Wet installation of the S-SA2 smoke damper
Legend for Figures of Wet Instalation
1 Smoke damper S-SA2 (actuator side)
2 Accessory LEAS/Connected ductwork tested according to EN 1366-9
3 Screw 5,5 DIN 7981 xing the Damper through bendable hangers
4 Gypsum plaster; Mortar; Concrete lling - minimal category M2.5, EN 998-2
Damper‘s horizontal blade axis orientation
Damper‘s vertical blade axis orientation
H
W
1
7
5
1
2
3
4
W
1
= W + 12
0
(
±
4
0
)
H
1
= H + 120 (±40)