INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION CE CT003

1 Introduction
1.1 Product description
The product is a centrifugal duct fan with an AC motor and a
casing made from galvanized steel.
The CE fan is supplied with a circular duct connection.
The CT fan is supplied with a rectangular duct connection on
the outlet and a circular duct connection on the inlet.
The product is not supplied with a safety switch, external
speed controller or flexible duct connections, these parts are
available and recommended as accessories.
1.2 Intended use
The product is intended for transportation of clean air with a
maximum temperature of 40–70 °C. Refer to
www.systemair.com for the maximum temperature of trans-
ported air for the applicable motor type. The product is appli-
cable for ambient temperatures of -25 °C to +70 °C.
The product is not applicable for transportation of air that
contains explosive, flammable or aggressive media. The
product is not applicable for locations where there is a risk of
explosion.
1.3 Document description
This document contains instructions for installation, operation
and maintenance of the product. The procedures must be
done by approved personnel only.
Speak to Systemair for more information on how to install the
product in different installation locations.
1.4 Product overview CE
1
5
3
2
4
1. Name plate with airflow direction arrow
2. Connection box
3. Duct connection inlet side
4. Motor and fan impeller (inside casing)
5. Duct connection outlet side
1