INSTALLATION ODS TOPVEX SR 135577 A003

Mounting ODS
|
5
2.2 Topvex SR09–11
1 Mount the offset parts on the exhaust air side.
2 Make sure the levelling is done, each foot shall be
supported. Mount each damper on the offset parts
with 4 M8x20 hexbolts and M8 nuts.
Note:
Images show left hand unit installation.
3 Mount the mounting brackets in each corner on the
unit. Use the bracket at a template and drill holes. Fas-
tened with sheet tracs.
4 Fastened threaded M10x70 bolts in each corner inside
the ODS.
5 Push the ODS and the air handling unit together. Lead
cabling from the damper along the inner wall of the
ODS and through the cable glands.
135577 | A003