211891 VTR250 CEILING MOUNTING KIT(A001)

Mounting the unit |
5
5 Mounting the unit
Important
If cooker hood option is not used, cover the cooker hood duct with an outside fitting end cap.
Remove screw (1) and washer (2) then
pull a lock mechanism to detach side
bracket. Repeat this step for the other
bracket.
Keep removed screws and washers for
later use as they will be needed to
tighten lock mechanisms back.
Loosen ten M5 screws (1) on both sides of the
unit. Attach side brackets (2) that came with
ceiling mounting kit and secure them with the
same screws (1) and M5 washers (C) that are
included in the accessory.
Spare M5 screws (D) are also included in the
accessory if needed.
211891 | A001