211891 VTR250 CEILING MOUNTING KIT(A001)
Table Of Contents
4
| Installation options
4.3 Fitting with anti-vibration mount (accessory, art. no. 134009)
2x Anti-vibration bracket
8x Hex bolt M6 x 12
8x M6 washer
8x Hex nut M6
Anti-vibration brackets (1) should be tightened to the ceiling mounting kit from the front and the rear or from both sides
with added hex bolts (2) then tightened with washers (3) and hex nuts (4) as shown in the illustration.
Tighten anti-vibration brackets with the
ceiling mounting kit to the main ceiling.
Choose screws based on your ceiling
structure. Included screws (A) can be used.
Leave at least a 4 mm gap between ceiling
mounting kit and false ceiling to prevent
vibration noises.
211891 | A001