pl frico S123

S123,Technical specification
Manufacturer: Kraus & Naimer
Supplier: Skandinaviska Solenoid AB
Type: CA10A311PN1
Rated current: 20A (AC21A Resistive load)
Connedctions: 2x2,5 mm
2
Protection class: IP42
Rated Operational Voltage Ue
690V
1)
Rated Insulation Voltage Ui
690V
1)
Rated Thermal Current Iu/Ith
20A
2)
Breaking Capacity
220V-
240V:
150A
2)
380V-
440V:
150A
2)
660V-
690V:
80A
2)
Rated Operational Current Ie
AC-15 Switching of control devices, contactors, valves etc.
220V-
240V:
5A
2)
380V-
440V:
4A
2)
AC-20A No-load operation
20A
2)
AC-21A Switching of resistive loads, including moderate overloads
For switching of power >1kW
20A
2)
AC-22A Switching of combined resistive or low inductive loads including moderate
overloads
220V-
500V:
20A
2)
1)...IEC 60947-3, EN 60947-3, VDE 0660 part 107 - Valid for lines with grounded common neutral termination, overvoltage category III, Other values on
request.
2)...IEC 60947-3, EN 60947-3, VDE 0660 part 107
Casing: PN1 plastic with a knob on the front
Program-no.A311, 2 sections
Frontlabel-no F001
45,8