DataSheet CFC202009

4 / 28 | Clean Filter Cassettes
Design
Material Composition
All the clean ltering cassette types are manufactured from a carbon steel sheet with a powder coating surface nish,
signal white RAL9003 gloss 30% as standard. Other RAL colours available upon request.
The structural joints on the clean ltering cassette casings are consistently welded to ensure the cassette airtightness
in front of as well as behind the lter. CFC-B’s joints in front of the lter are spot welded and hermetically sealed by putty.
Fig. 1: Components of the CFC
Product Parts:
1. Front diffuser panel
2. Connection
3. Filter clogging measurement pipe
4. Central xing traverse available for CFC design type
C, B, G or R to attach front diffuser panels CFC-AQ,
C F C- V R a n d C F C-V N
5. Gel gasket lter xing springs available on CFC-G
6. Filter gasket tightness indication pipe available
on CFC design type C, B, R or W. It is functional only
for lters with double row gaskets.
7. Filter
8. Combined xing bracket available for CFC design
type C, B, G or R to attach front diffuser panels
CFC-PP and CFC-SF
9. Clean ltering cassette casing
10. Front panel tting surface on CFC design type
C, B, G and R:
• Type 1 (alignment rim) - intended for plasterboard
suspended ceiling.
• Type 2 (simple) - intended for metal plate
or T-bar suspended ceiling.
Front panel tting surface on CFC-W is identical
with Systemair plenum box PB-NOVA.
2
3
4
5
6
1
8
7
10
9
10 - Type 1
10 - Type 2