DataSheet CFC202009

Clean Filter Cassettes | 23 / 28
CFC-AF
Adapter Ledge
Dimensions
Dimensions of the adapter ledge (A
1
× B
1
) correspond
with dimensions of CFC design types C, B and R.
The adapter ledge CFC-AF can be used only for selected
sizes and types of CFC in combination with selected
rasters and types of the suspended ceilings.
See
Tab. 3, Tab. 4 and Tab. 6.
Description
When mounting the clean ltering cassette into a metal
plate or a T-bar suspended ceiling, the clean ltering
cassette is equipped with adapter ledges to adjust
the given clean ltering cassette dimensions to the
installation opening size (see
Fig. 3 and Fig. 4).
It is needed to specify the corresponding information
in the ordering code (in the „Ceiling type, raster“ eld).
Design
The ledges are manufactured from a steel sheet
with the same surface nish as the one chosen
for the clean ltering cassette.
S600, S625 T600, T625
A
1
B
1
Fig. 11: Design and dimensions of the CFC-AF
ACCESSORIES
Ordering Code
NOTES:
By default, the adapter ledge is supplied already mounted onto the clean
ltering cassette, if clean ltering cassette and the adapter ledge were
ordered together.
1) Applicable sizes of clean ltering cassettes for combination with adapter
ledge are in
Tab. 3, Tab. 4 and Tab. 6.
2) If no Surface nish is dened, RAL9003 will be delivered.
CFC-AF- - -
Corresponding Filter Dimensions A×B
Metal plate suspended ceiling, Raster 600 mm S600
Metal plate suspended ceiling, Raster 625 mm S625
T-bar suspended ceiling, Raster 600 mm T600
Ceiling Type, Raster
1)
T-bar suspended ceiling, Raster 625 mm T625
Signal white RAL9003, 30% gloss SW
Surface Finish
2)
Other RAL colour RALXXXX
Example of the Ordering Code
CFC-AF-305×305-T600-SW
Adapter ledge for lter dimensions (mm) 305 × 305,
intended for T-bar suspended ceiling with raster 600
mm. Signal white powder coating.