Environmental facts CB, CBT, CIRT, MDC, RTI2(V)

Silver compounds (4) X
3
Metal parts in the product
3,1 Do the metal parts in the product contain any of the following
environmentally hazardous substances?
Arsenic (including compounds) (3,4) X
Lead (including compounds) (3,4,5) X
Cadmium (including compounds) (3,4,5) X
4
Other parts
4,1 Does the product contain parts made of glass with lead additives? (2) X According to RoHS
4,2 Does the product contain parts made of wood from tropical rain
forests? (7)
X
5
Paint/Varnish
5,1 Are there chemical products in the paint/varnish used which are
classified as environmentally hazardous? (8)
X X2
5,2 Are there any environmentally hazardous metal pigments in the
paint/varnish? (3,4,5)
X X1
6
Solvents in paint/varnish
6,1 Are solvent-based paints/varnishes used on any of the parts of the
product?
X
6,2 Is the level of VOCs (volatile organic compounds) in the paint/varnish
used higher than 25% by weight? (8)
X
6,3 Does the paint/varnish contain aromatic hydrocarbons? (5) X X3
6,4 Are water or environmentally acceptable solvents used in the
paint/varnish? (9)
X X4
7
Other surface treatment of metal
7,1 State methods for surface treatment of metal parts (galvanising,
chromium plating etc.):
X
8
Packaging
8,1 Does the packaging consist of any of the following acceptable
materials (materials are listed in order where I is the best alternative)?
I Unbleached paper/carton from recycled fibre. X
II Polyethylene or Polypropylene plastic from recycled material. X
III One of the materials from groups I or II is manufactured from new
raw materials
X
8.1.1 Packaging consists of the following pure (not composite) materials
not included above:
8.1.2 Packaging consists of the following composite materials:
8,2 Is all plastic material in the packaging marked according to standard
specifications DIN 54 840 and/or ISO†11469 to simplify recycling?
X