Product sheet PSM01

4 M9108, M9116, M9124, and M9132 Series Electric Non-spring Return Actuators Product Bulletin
Technical Data
Product
M91xx Series Electric Non-spring Return Actuators
Power Requirements
M9108-, M9116-AGx: 20 to 30 VAC at 50/60 Hz or 24 VDC ±10%; 6.5 VA supply, Class 2
All Other Models: 20 to 30 VAC at 50/60 Hz or 24 VDC ±10%; 7.5 VA supply, Class 2
Input Signal
AGx: 24 VAC at 50/60 Hz or 24 VDC
GGx, HGx: 0 (2) to 10 VDC, 0 (4) to 20 VDC, or 0 (4) to 20 mA
JGx: Potentiometer value is 100 ohms minimum to 10,000 ohms maximum
Input Signal Adjustments
AGx: Factory Setting, Terminals 1 and 2, CW rotation; Terminals 1 and 3, CCW rotation
GGx, HGx (Voltage Input or Current Input):
Jumper selectable: 0 (2) to 10 VDC, 0 (4) to 20 VDC, or 0 (4) to 20 mA
Adjustable: Zero, 0 to 6 VDC, 0 to 12 VDC, or 0 to 12 mA
Span, 2 to 10 VDC, 4 to 20 VDC, or 4 to 20 mA
Factory Setting: 0 to 10 VDC, 0 to 20 mA, CW rotation with signal increase
GGx, HGx, and JGx: Action is jumper selectable Direct (CW) or Reverse (CCW) with
signal increase.
Input Impedance
GGx, HGx: Voltage Input, 205,000 ohms for 0 (2) to 10 V and 410,000 ohms for 0 (4) to 20 V
Current Input, 500 ohms
JGx: 1.8 Megohms
Feedback Signal
AGD: 135 ohm feedback potentiometer
AGE: 1,000 ohm feedback potentiometer
GGx, HGx: 0 to 10 VDC or 2 to 10 VDC for 90° (10 VDC at 1 mA)
Corresponds to input signal span selection.
JGx: 0 to 10 VDC for 90° (10 VDC at 1 mA)
Auxiliary Switch Rating
xGC: Two Single-Pole, Double-Throw (SPDT) switches rated at 24 VAC
1.5 A inductive, 3.0 A resistive; 35 VA maximum per switch, Class 2
Mechanical Output
(Running Torque)
M9108: 70 lb·in (8 N·m) for one unit; not intended for tandem use
M9116: 140 lb·in (16 N·m) for one unit, 280 lb·in (32 N·m) for two in tandem (GGx, HGx)
M9124: 210 lb·in (24 N·m) for one unit, 420 lb·in (48 N·m) for two in tandem (AGx, GGx, HGx)
M9132: 280 lb·in (32 N·m) for one, 560 lb·in (64 N·m) for two in tandem (AGx, GGx)
Audible Noise Rating
45 dBA at 1 m
Rotation Range
0 to 90° in 5-degree increments, mechanically limited to 93°
Rotation Time
M9108: 30 seconds at 50% rated load, 25 to 50 seconds for 0 to 70 lb·in (0 to 8 N·m)
M9116: 80 seconds at 50% rated load, 70 to 115 seconds for 0 to 140 lb·in (0 to 16 N·m)
M9124: 130 seconds at 50% rated load, 115 to 175 seconds for 0 to 210 lb·in (0 to 24 N·m)
M9132: 140 seconds at 50% rated load, 115 to 205 seconds for 0 to 280 lb·in (0 to 32 N·m)
Electrical Connection
M9124-, M9132-AGx: 1/4 in. spade terminals with pluggable 3-terminal blocks
All Other Models: Screw terminals for 22 to 14 AWG; maximum of two 18, 20, or
22 AWG per terminal
Mechanical Connection
3/8 to 3/4 in. (10 to 20 mm) diameter round shaft or 3/8 to 5/8 in. (10 to 16 mm) square shaft
Enclosure
NEMA 2, IP42
Ambient Conditions
Operating: -4 to 122°F (-20 to 50°C); 0 to 95% RH, non-condensing
Storage: -40 to 186°F (-40 to 86°C); 0 to 95% RH, non-condensing
Dimensions (H x W x D)
7.09 x 3.94 x 2.54 in. (180 x 100 x 64.5 mm)
Shipping Weight
2.9 lb (1.3 kg)
Agency Compliance
UL 873 Listed, File E27734, CCN XAPX
CSA C22.2 No. 139 Certified, File LR85083, Class 3221 02
CE Mark, EMC Directive 89/336/EEC
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Controls Group
507 E. Michigan Street
P.O. Box 423 Printed in U.S.A.
Milwaukee, WI 53201 www.johnsoncontrols.com