Product sheet PSM01

M9108, M9116, M9124, and M9132 Series Electric Non-spring Return Actuators Product Bulletin 3
Repairs and Replacement
Field repairs must not be made. To order a
replacement or an accessory, refer to the Ordering
Information section.
Ordering Information
Contact the nearest Johnson Controls representative,
and specify the desired product code number from
Table 1 or 2.
Table 1: Actuators
70 lb·in
(
8 N·m
)
140 lb·in
(
16 N·m
)
210 lb·in
(
24 N·m
)
280 lb·in
(
32 N·m
)
M91xx Series
Electric Non-spring
Return Actuators
M9108-AGA-2
M9108-AGC-2 M9108-AGD-2
M9108-AGE-2
M9108-GGA-2
M9108-GGC-2
M9108-HGA-2
M9108-HGC-2
M9108-JGA-2
M9108-JGC-2
M9116-AGA-2
M9116-AGC-2 M9116-AGD-2
M9116-AGE-2
M9116-GGA-2
M9116-GGC-2
M9116-HGA-2
M9116-HGC-2
M9116-JGA-2
M9116-JGC-2
M9124-AGA-2
M9124-AGC-2 M9124-AGD-2
M9124-AGE-2
M9124-GGA-2
M9124-GGC-2
M9124-HGA-2
M9124-HGC-2
M9124-JGA-2
M9124-JGC-2
M9132-AGA-2
M9132-AGC-2
M9132-AGE-2
M9132-GGA-2
M9132-GGC-2
On/Off Control
   
Floating Control
   
Proportional Control
   
VDC and mA Input with
Zero and S
p
an
  
Resistive Input Control
  
Feedback
135 ohm Potentiometer

1,000 ohm Potentiometer

0 to 10 VDC
   
2 Auxiliary Switches
    
Tandem Operation
  
Note: Use two actuators with the same torque and control input for tandem operation.
Table 2: Accessories
Product Code
Number
Description
DMPR-KR003* Sleeve Pin Kit for Johnson Controls round dampers with a 5/16 in. (8 mm) diameter shaft
DMPR-KC003* Blade Pin Extension without Bracket for Johnson Controls CD-1300 direct-mount applications
DMPR-KC254 Inside Frame Mounting Kit for damper applications requiring the actuator within the airstream
M9000-103 14 VA Transformer, 120/24 VAC, 60 Hz, Class 2
M9000-104 14 VA Transformer, 230/24 VAC, 60 Hz, Class 2
M9000-105 Pluggable 3-terminal block
M9000-150
Damper Mount Linkage Kit for remote inside duct mounting an M9108, M9116, M9124, or M9216 actuator
to a 3-blade ot larger damper (not intended for a Johnson Controls damper)
M9000-151
Base Mount Linkage Kit for remote inside duct mounting (not intended for M9132 actuators or any tandem
application)
M9000-153 Crank Arm Kit for remote mounting (not intended for M9132 actuators or any tandem application)
M9000-154 1 in. Jackshaft Coupler Kit for mounting on a 1 in. diameter damper shaft
M9000-155 Manual Handle for positioning a damper or valve when power is removed from an M91xx actuator
M9000-158 Mounting Kit to tandem mount two M9116 GGx or HGx; two M9124 AGx, GGx or HGx models; or
two M9132 AGx or GGx models on a damper
M9000-160 Replacement anti-rotation bracket for M91xx Series actuators
M9000-200 Commissioning Tool provides a control signal to drive on/off, floating, proportional, or resistive actuators.
M9000-500 Valve Linkage Kit for mounting M9116 actuators to 1/2 to 2 in. VG7000 Series globe valves
M9000-510 Valve Linkage Kit for mounting M9108, M9116, and M9124 actuators to 1/2 through 1-1/4 in. 2-way and
1/2 and 3/4 in. 3-way VG1000 Series ball valves
M9000-511 Valve Linkage Kit for mounting M9124 actuators to 1-1/2 in. 2-way and 3-way VG1000 Series ball valves,
and M9116 and M9124 actuators to 1 and 1-1/4 in. 3-way VG1000 Series ball valves
* Furnished with the damper and may be ordered separately.