User's Manual

Chapter 1 - Basic Operations Page 5
Select the firing mode by using the
safety / fire selector lever. Its operation
and position is the same as a real M16.
2 firing mode is provided: semi-
automatic and fully-automatic. Your
Professional Training Weapon is now
ready to fire. Return the selector lever
to “safe” after firing.
The Professional Training Weapon has
a sensor that will cut off electricity to the
motor once it has sensed that the
magazine is emptied. To reload the
weapon, depress the magazine release
button and remove the magazine.
Repeat the previous steps (insert new
magazine and depress the bolt-catch
release) to resume firing.
Depress the bolt-catch release pad to
simulate releasing the bolt of a real
M16. Although you will not feel a bolt
slamming forward in the Professional
Training Weapon, this action is still
required as an electrical sensor located
behind the bolt-catch will prevent the
gun from firing after a magazine is emptied. This is designed to simulate a real
M16’s operation as closely as possible.
Firing
First insert a loaded magazine into the
magazine well as you would with a real
M4/M16. You can ensure the magazine
catch is fully engaged by briefly pulling
the magazine down after its inserted.