User's Manual

Battery Installations (Continued)
Chapter 1 - Basic Operations Page 3
After the battery compartment door is
removed, locate the battery connector
inside the center tube, and extract it out
of the stock. Pull the connector lightly to
avoid damage to the wiring.
Insert battery as shown, ensuring the
connectors on both the battery-side and
the stock-side lines up, then carefully
connect them. The connectors are
polarized so they will only fit together in
one direction.
With the connectors securely locked
together, proceed to slide the battery
into the stock. Pull the small wire gently
as shown to assist in retracting the
battery connectors back into the center
tube. This will also ensure proper stock
extension/retraction without tangling the
electrical connections.
Finally install the battery compartment
cover, making sure it latches securely to
the stock. Your Systema Professional
Training Weapon is now ready for use.
When replacing batteries, wait
at least 10 seconds after the
drained battery is removed,
before you connect the freshly
charged battery. This will allow
the circuitry to reset.