User's Manual

Preparations
Battery Installations
Prior to use, a battery must be installed
to power the Systema Professional
Training Weapon. To install the battery,
first ensure the custom collapsible stock
is completely retracted (as shown).
Then Locate the two notches that
secure the battery compartment cover
(butt plate) to the stock. Lightly squeeze
them together to remove the battery
compartment cover.
The Systema Training Weapon
use a high-power,
rechargeable . v Ni-CD
battery pack as its power source
, please ensure
battery pack fully charged for
optimal performance. Refer to your
battery charger’s instructions on how to
charge (as well as
discharge / condition as
needed) .
In addition, before and after each training sessions, visually inspect each
Systema Training Weapon for damages. If any structural damages to the unit is
found, contact your Systema dealer for repair or replacements.
Model
M4A1 highly
customerized 7 2
. Before
each training session
your (s) are
the battery pack
ing cycles
Both the battery packs and
battery chargers are available from your
Systema dealer.
Chapter 1 - Basic Operations Page 2
Chapter 1 — Basic Operations