User's Manual

BASIC OPERATION
The Vengeance paintball marker fires from a closed bolt system. This not only
improves efficiency; it also makes the marker more accurate. This closed bolt design
also reduces ball breakage by reducing the violent forces present in most blow
back/open bolt design markers. The Vengeance mark cocking mechanism is actuated
during the trigger pull of the swing trigger. During this pull, the sear is lowered,
releasing the hammer and firing the gun. At almost the same second, the trigger
actuates the three-way causing the Ram to re-cock the marker.
Note: This marker is not designed to shoot liquid CO
2
. Allowing liquid CO
2
to flow
through the marker will eventually cause the marker to malfunction and possibly cause
damage to the seals. Do not use a siphon tube bottle or mount the bottle so that liquid
CO
2
enters the marker (e.g. California Style or Bottom Line). If your marker utilizes one
of these mounting styles for your CO
2
system, an anti-siphon tube in the tank valve,
properly set-up to the marker, must be used.
4