User's Manual

16. Frame:
- 2 10-32 button head screws to mount frame to gun body. - Solenoid with 3 high flow barbs. - 2 m1.6 x .35 screws to hold solenoid down. - 1/8 magnet. - 8-32 shoulder screw to hold trigger down. - WAS board with harness, eye sensors and switch. - 2 m1.6x.35 screws to hold trigger switch down. - 2 nylon dowels to hold the board in place. - Button to activate board. - LED Window - 9V battery - 3 4-40 screws to clamp the frame down - 1 4-40 screw to clamp front of frame and to hold trigger guard down.
17 Trigger:
- 2 ball bearings. - 4-40 set screw for trigger activation. - 4-40 set screw for trigger stop. - 4-40 set screw for magnet strength.
18 Trigger Guard:
- 4-40 screw to clamp front of frame and to hold trigger guard down.
19 In-line Regulator: Serviceable
- 015 o-rings. - Regulator kit:
-Spring. -Valve pin. Serviceable -REG seat. Serviceable -3/8 brass pin screw with 010 o-ring. Serviceable
- 018 o-ring. Serviceable - Big piston with o-ring. Serviceable - Big spring. - Disc. - Set screw.
20 Steel braided line:
- 90* elbow:
21 Shuttle drop:
- 2 10-32 tapered head screws. - 3 10-32 set screws.
22 Deluxe on/off: Serviceable
- Piston with 010 o-ring. Serviceable - 2 1/8-27 npt plugs.
06
MARKER COMPONENTS/SPECIFICATIONS