User's Manual

Gun consistently leaks down the barrel, decreasing slightly when bolt

is pushed forward.

. Heavy use of lightweight oil causes deterioration of Poppet

O-ring and/or Cup Seal. Remove Poppet and replace O-ring.

Remove and replace Cup Seal washer.

Bolt moves freely

. one or more of the airlines are crimped. Remove grip and

reposition airline/lines

Gun is pressurized and will not fire.

. Make sure the NME is turned on.

. If eye's are enabled make sure there is a ball in the breach and

readable.

. Make sure electrical wiring and harness are intact.

Marker fires with first shot extremely low.

. Poppet O-ring is dry. Grease Poppet O-ring.

. In-line Regulator is set to low. Increase pressure.

Marker cycles but does not fire.

. Dwell is set to low.

. LPR is set to low

. Regulator Pin Valve has debris lodged between valve and seal.

Remove debris from Regulator Pin Valve.

. High-pressure regulator piston is dry. Lube piston.

. Large ram o-ring (rear) is worn. Replace o-ring.

Inconsistent velocity.

. Paint does not fit barrel. Use appropriate size of paintball.

. Dwell is set to low.

. LPR needs to be lubed.

. In-line regulator needs to be lubed.

. Low Battery. Remove and replace Battery.

Regulator pressure will not adjust.

. Pin portion is bent causing unreliable seal. Remove and replace

Pin Valve.

. Make sure no parts are missing in the regulator.

MARKER COMPONENTS

FOR UPDATES ON OWNERS MANUAL GO TO

“www.systemx.com”