User's Manual

GlobalTrak ™ Field Setup and Diagnostic Guide
2.4 Open the file created in step 1.9 with Notepad.
2.5 Use the ‘Find’ function to search for sensor readings by opening the ‘Find’ dialog box in
the ‘Edit’ menu. Search for “LR Creation” as shown below in Figure 2.2.
Figure 2.2
2.6 As shown in Figure 2.3, the sensor values are listed below the “LR Creation” line.
Figure 2.3
2.7 Record results in Appendix B: Field Test Checklist. The values should be with the ranges
listed in Appendix A. If a sensor is out of range, consult Appendix C for troubleshooting.
2.8 Close Notepad
Prepared: R. Straz Date: May 31, 2006 Page 7 of 17