User's Manual

GlobalTrak ™ Field Setup and Diagnostic Guide
Capture Diagnostic Information
1.6. Start log capture by clicking on ‘Capture Text…’ from the ‘Transfer’ menu.
1.7. In the Capture Text dialog box, name the file as shown in Figure 1.3. Use the same
convention as in step 1.3.
Figure 1.3
1.8. Note the location and filename on the field test checklist in appendix A:
1.9. Click ‘Start’ to begin capturing text.
Prepared: R. Straz Date: May 31, 2006 Page 5 of 17