User's Manual

GlobalTrak ™ Field Setup and Diagnostic Guide
GlobalTrak™ Field Setup and Diagnostic
Guide
This purpose of the GlobalTrak
™ Field Setup and Diagnostic Guide is to:
• Test each module as installed for fielding
To complete the Field Setup and Diagnostic procedure, the following are necessary:
1. Completed, Configured GlobalTrak installation
2. Laptop computer with RS232 port
3. CMU Field Test Cable
4. CMU Key switch
5. Quad-band GSM phone with Kore SIM card (Optional)
6. Orbcomm Antenna Analyzer (Optional) *
7. Orbcomm Spectrum Analyzer (Optional) *
8. Orbcomm View Software (Optional) *
* Note: Items 6, 7, 8 only needed for installations requiring satellite communication
Prepared: R. Straz Date: May 31, 2006 Page 2 of 17