User's Manual

GlobalTrak ™ Field Setup and Diagnostic Guide
Figrure 5.2
5.6 Switch the CMU to the Off (Verticle) position.
5.7 Remove the CMU Field Test cable from the CMU.
5.8 Close the Diagnostic port dust cap.
5.9 Return the CMU to the fielded installation.
5.10 Switch the CMU to the On (Horizontal) position.
5.11 Watch for the green LED to illuminate, indicating that the device is running properly.
Prepared: R. Straz Date: May 31, 2006 Page 12 of 17