User's Manual
Table Of Contents
GlobalTrak ™ Field Setup and Diagnostic Guide
5.0 Final Configuration
Note: Be sure to complete 1.0 initial setup.
5.1 Reconnect the GSM antenna.
5.2 Switch the CMU to the On (Horizontal) position.
5.3 Clear any queued messages by typing the command below in HyperTerminal. Figure 5.1
shows an example of what should be seen on the HyperTerminal window.
65 [enter]
6 [enter]
Figure 5.1
5.4 Clear any backup records by typing the command below. Figure 5.2 shows an example
of what should be seen on the HyperTerminal window.
65 [enter]
8 [enter]
Prepared: R. Straz Date: May 31, 2006 Page 11 of 17