User's Manual

V3d Product Specification, Version 2.06
5.0 Mechanical Requirements
The relevant mechanical requirements for the intended product use are detailed below.
5.1 Lifespan
All mechanical components (RF shielding and packaging) shall have an expected availability of
a minimum of 3 years.
5.2 Physical Parameters
5.2.1 Enclosure Size
The V3d enclosure shall have a maximum footprint of 18.5 x 22.1 cm (7.3” x 8.7”) and shall
have a height of no more than 7.6 cm (3.0”).
5.2.2 Weight
The weight of the V3d unit shall not exceed 2.3 kg (5 lb), including batteries, but not including
the mounting bracket.
5.2.3 Mounting
A bracket shall provide for simplified mounting of the V3d enclosure to a flat surface. Options
for adhesive tape or conventional screw-down fastening shall be provided.
5.2.4 Labeling
The V3d manufacturing label shall include the V3d serial number, both in bar scan format and in
plain text. All type approvals shall be included in the label. If the V3d is individually packaged,
then the packaging shall also have a bar-scannable label.
5.2.5 Enclosure Color
The enclosure color shall be silver, specifically Pantone Matching System (PMS) # 877.
5.2.6 Enclosure Material
The enclosure is to be constructed of plastic to minimize weight.
5.2.7 Mounting Bracket
The enclosure mounting bracket may frequently be permanently mounted in sea containers but
left behind when a V3d is moved to a different sea container. Therefore a primary consideration
in its design and manufacture is low cost. Weight is also a factor in envisioned RFID tracking
applications, for example when attached to pallets of goods.
MobiApps Proprietary & Confidential Document
© 2006 Page 18