User's Manual

GlobalTrak ™ GT Lite Operation and Maintenance Manual
0 = GPS Off
1 = GPS Acquisition mode
2 = GPS Tracking mode
Expected Response:
OK
View Default Assistance Latitude
View the default latitude used for assistance data. This is only used if no GPS fix has been
received by the device.
Command:
AT+PARAM=”ASSTLAT”
Expected Response:
APPLICATION: (SYSSTAT_ParamCommandHandler) Enter.
+SYSSTAT: ASSTLAT=<asstlat>
OK
<asstlat>: Default latitude for assistance data in decimal form
Set Default Assistance Latitude
Set the default latitude used for assistance data. This is only used if no GPS fix has been
received by the device.
Command:
AT+PARAM=”ASSTLAT”,”<asstlat>”
<asstlat>: Default latitude for assistance data in decimal form
Expected Response:
OK
View Default Assistance Longitude
View the default longitude used for assistance data. This is only used if no GPS fix has been
received by the device.
Command:
AT+PARAM=”ASSTLONG”
Expected Response:
APPLICATION: (SYSSTAT_ParamCommandHandler) Enter.
+SYSSTAT: ASSTLONG=<asstlon>
OK
<asstlon>: Default longitude for assistance data in decimal form
Prepared: R. Straz Date: July 25, 2007 Page 79 of
139