User's Manual

ManualsBrandsSystem Planning ManualsElectronicslocal control for remote installations

Table Of Contents

1.1 GT Lite Overview
- Feature List
- Asset Tracking and Monitoring
- GT Lite Exterior Hardware Description
- GT Lite Operational Description
- GT Lite Sensor Suite
- GT Lite GPS
- GT Lite Wireless Sensors
2.1 GT Lite Detailed Hardware Description
- Functional and Electrical Systems
- Mechanical Description
  - Physical Parameters
  - External Connectors
    - Power I/O Connector
2.2 GT Lite Detailed Software Description
- Device Logic and Event Handling
- Device to Server Message Description
- Server to Device Message Description
3.1 Updating the Main Processor Software
- Programming over Serial
- Programming over USB
- Programming Over-the-Air
3.2 Updating Main Processor Firmware
- Firmware Update Procedure
- Firmware Versioning Information
3.3 Programming the Low Power Controller
- Programming over USB
- Programming Over-the-Air
3.4 Recovering the GT Lite
4.1 Install GT Lite USB Drivers
- Install USB Driver
- Configure USB Driver
4.2 Create HyperTerminal Connection
4.3 Connect GT Lite to HyperTerminal
5.1 Monitoring the GT Lite
- Diagnostic Overview
  - Subsystem
- Common GT Lite Functions
  - Low Power Controller Communication
- Common Diagnostic Output
  - APPLICATION: IMEI:
5.2 Configuring the GT Lite
- Configurable Parameters
- Local Configuration and Commands
- Remote Configuration
6.1 Using the GT Lite
6.2 Installation Types
- Dry Goods Container Bracket
- Reefer Container Bracket
- In Cargo Installation
- Magnetic Mount Bracket
7.1 Handling GT Lite
7.2 GT Lite Maintenance
- Charging the GT Lite
8.1 Standards
- Electromagnetic Compatibility
- Environmental Limits
8.2 Certifications
9.1 Diagnostic Setup Troubleshooting
9.2 Programming Troubleshooting
9.3 Configuration Troubleshooting
9.4 Installation and Operational Troubleshooting
9.5 Maintenance Troubleshooting
12.1 Overview
12.2 Pairing
12.3 Operations and Installation
12.4 Supported Devices
12.5 Wireless Devices Troubleshooting
13.1 Overview
13.2 Detailed Description
13.3 Operations and Installation
13.4 Troubleshooting
14.1 Overview
14.2 Detailed Description
14.3 Operations and Installation
14.4 Troubleshooting
15.1 Overview
15.2 Detailed Description
15.3 Operations and Installation
15.4 Supported Tags
15.5 Troubleshooting
16.1 Overview
16.2 Detailed Description
16.3 Operations and Installation
16.4 Troubleshooting
17.1 Overview
17.2 Detailed Description
17.3 Operations and Installation
17.4 Supported Tags
17.5 Troubleshooting

GlobalTrak ™ GT Lite Operation and Maintenance Manual

Figure XXXXXX

12. Click OK to accept the settings

13. Click OK on the Properties window

14. Power off GT Lite

Prepared: R. Straz Date: July 25, 2007 Page 53 of

139