User's Manual

GlobalTrak ™ GT Lite Operation and Maintenance Manual
GT Lite Exterior Hardware Description
GT Lite case is an IP66/67 designed enclosure. The standard enclosure has one exterior
connector, one keyed power switch, 4 indicator LED’s, and one light sensor.
Figure 1 shows the front face of the enclosure which contains the key switch and interface
connector. As shown in the figure, the key turned to ‘0’ means off and the key turned to ‘1’
means on. The interface connector is a multi-use connector used for charging, diagnostics,
programming, and external sensors.
Figure 1
Figure 2 shows the top face of the enclosure. The top face of the enclosure contains the 4
LED’s and the light sensor. The operation of the LED’s is described below.
Figure 2
LED Description
USB: The USB LED indicates when the USB diagnostic interface is connected to a computer.
The LED will illuminate green when connected and dark when not.
Prepared: R. Straz Date: July 25, 2007 Page 10 of
139