User's Manual

GlobalTrak™Assembly203026,E‐SealwithZigBeeInterfaceV2OperationManual
Prepared: J. Carn Date: May 24, 2012 Page 10 of 11
2.3:Removal&Deactivation
1. RemovetheGlobalTrakE‐SealwithZigBeeInterfaceV2bycuttingthechimneyofthelockingbody.
Note
:Boltcuttersareneededforremoval.

Figure10.Cutlockingbodychimney.
2. Oncethelockingbodyisremoved,proceedbypullingtheGlobalTrakE‐SealwithZigBeeInterfaceV2off
oftheboltbyusingadownwardmotion.

Figure11.Pullbodydownwards.