User's Manual

over long periods of time.
There are two power supply variants:
HFR4 - a device that can be easily attached to a wall or flat surface and be charged from a
5V standard mains powered PSU
NOTE the PSU is not supplied as part of the product
HGR4 - a portable device that can be placed on or inside a package and is charged using
a standard wireless Qi charger
NOTE the Qi charger is not supplied as part of the product
Please contact System Loco at systemloco.com for further details or technical assistance
Key Features
Easy to install, and pre-configured for use
Provides 40 days of battery life at 15 minute reporting intervals
Works indoors & outdoors
Mains 5V or Qi wireless charging
Loco - localisation/reporting engine, enabling unit to be configured & controlled remotely
Environmental sensors for temperature, light, movement, tip, impact & shock monitoring
Secure, authenticated communications: LTE Cat-M1, 2G, WiFi
Secure BLE Gateway to communicate with LocoTags
Activation
Configure the device behaviour using the locoaware.com portal.
Click the button to turn the LocoTrack Rechargeable device on and begin using.
Operation
The LocoTrack Rechargeable was designed for simple operation.
There is only one button for the LocoTrack Rechargeable. The button will force the unit to report.
Once the button is pressed it will do a full report with GPS. The LED will indicate the device's
progress. Please see LED patterns in the System Loco Knowledge Base for more details.
With the device ‘on,’ it is ready to be used for its normal operation.
The LocoTrack Rechargeable supports LocoTag BLE tag tracking capabilities. LocoTag
association is performed in the LocoAware application.
NOTE: Monitor the device behaviour with your login to the locoaware.com portal.
Operating Conditions
-10 degrees C to 50 degrees C