Data Sheet

RM9000
Multiprotocol 2.4GHz Wireless Module
Datasheet
14 / 17
System Design Co., Ltd.
measured at a dedicated antenna connection. All measurements are performed conducted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX
UNIT
Spurious emissions,
regular PA
(1)
f < 1 GHz, outside restricted
bands
+5 dBm setting
< –36
dBm
f < 1 GHz, restricted bands
ETSI
< –54
dBm
f < 1 GHz, restricted bands
FCC
< –55
dBm
f > 1 GHz, including harmonics
< –42
dBm
Harmonics,
regular PA
(1)
Second harmonic
< –42
dBm
Third harmonic
< –42
dBm
(1) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan).
(2) To ensure margins for passing FCC band edge requirements at 2483.5 MHz, a lower than maximum output-power setting or less than
100% duty cycle may be used when operating at the upper BLE channel(s).
(3) To ensure margins for passing FCC requirements for harmonic emission, duty cycling may be required. The CC1352P-2 LaunchPad
reference design should also be reviewed as the filter provides higher attenuation of harmonics compared to the CC1352PEM-
XD7793-XD24-PA24 reference design.
(4) Measured on evaluation board as described in Optimizing the CC1352P and CC2652P for Coin Cell Operation at 5 dBm Output
Power.
4.12 Bluetooth Antenna
Key Specifications - Electrical
Operating temperature range
-40 to 85°C
Impedance
50 ohm
Gain
3.03 - 2.6dBi
VSWR
≤1.5.1
Max input power
50W
Voltage and supply current
Passive
Frequency
2400 - 2500MHz
Polarization
Vertical
Gain (Wi-Fi)
2400MHz
1.79dBi
2500MHz
2.74dBi
Key Specifications - Mechanical
Dimensions
115mm x 22mm x 4mm
Cable type
RG174
Figure 4-11. Antenna